SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

SOLARLOK PV Edge分散式接線盒是全球市場上第一款使用邊緣作為固定位置的固定和非密封接線盒，無需鑽孔。 襟翼（有不同的肩高可供選擇）可以保護銅箔和使用者，通過IEC和UL認證的1500V解決方案。 由於採用了夾緊和非灌裝設計，因此安裝非常快捷，並且固化時間不會超過6小時。

Benefits
•Quick installation time with a line and no potting necessary
•Reliability is increased with no holes in the panels that can cause damage
•Better heat transfer in case of shading with diode in separate compartment
•Increase power handling by 2A with thermal pad design
•Reduce foil installation time with the lid and base angled (shaped) design
•Available in E-W and N-S rail directions to cover all possible module layouts
•Provides waterproof protection and is rated IP68 (1 m / 24 hours)
•Use of vent for humidity control
•Includes integrated PV4-S interface into the junction box

HIGH THERMAL AND DIELECTRIC PERFORMANCE INSULATOR PAD
TgardTM K52 is a high thermal and dielectric performance insulator pad consisting of a
ceramic filled phase change compound coated on MT Kapton film.
TgardTM K52 phase change coating all but eliminates contact thermal resistance. The
phase change coating melts at 52ºC and replaces all contact areas that contain air.
TgardTM K52-1 is ideal for applications requiring the best thermal performing insulator
material.
TgardTM K52-2 has the best balance of thermal, dielectric and cut through performance.
TgardTM K52-3 is a 3 mil MT Kapton film that provides the best crush and cut and tear resistance available with thermal properties that are still in the high performance category.

HIGH THERMAL AND DIELECTRIC PERFORMANCE INSULATOR PAD
TgardTM K52 is a high thermal and dielectric performance insulator pad consisting of a
ceramic filled phase change compound coated on MT Kapton film.
TgardTM K52 phase change coating all but eliminates contact thermal resistance. The
phase change coating melts at 52ºC and replaces all contact areas that contain air.
TgardTM K52-1 is ideal for applications requiring the best thermal performing insulator
material.
TgardTM K52-2 has the best balance of thermal, dielectric and cut through performance.
TgardTM K52-3 is a 3 mil MT Kapton film that provides the best crush and cut and tear resistance available with thermal properties that are still in the high performance category.

HIGH THERMAL AND DIELECTRIC PERFORMANCE INSULATOR PAD
TgardTM K52 is a high thermal and dielectric performance insulator pad consisting of a
ceramic filled phase change compound coated on MT Kapton film.
TgardTM K52 phase change coating all but eliminates contact thermal resistance. The
phase change coating melts at 52ºC and replaces all contact areas that contain air.
TgardTM K52-1 is ideal for applications requiring the best thermal performing insulator
material.
TgardTM K52-2 has the best balance of thermal, dielectric and cut through performance.
TgardTM K52-3 is a 3 mil MT Kapton film that provides the best crush and cut and tear resistance available with thermal properties that are still in the high performance category.

Thermally Conductive Electrically Insulative Material
TgardTM 5000 is an excellent dielectric material with good thermal performance consisting of a polyimide
film coated with a ceramic filled high temperature silicone rubber.
TgardTM 5000 is ideal for applications that require a delta temperature across the interface of 2.0°C/watt or
higher on a TO-220 clip mounted @ 50 psi pressure.
TgardTM 5000 has high dielectric strength for the AC side of a switching mode power supply.
TgardTM 5000 is tough resulting in an exceptional cut-through resistant material.